Fractional photo thermolysis creates an array of microscopic thermal wounds, called microscopic treatment zones, at specific depths. Unlike other ablative and nonablative lasers, which produce layers of thermal heating, the FP creates microscopic columns of thermal damage, sparing surrounding tissues and promoting more rapid healing. The FP treatment results which are collagen remodeling and skin turnover are excellent. Removing lentigines and other discolorations and producing fresher, tighter, and more youthful skin could be little to no downtime.
Applications:
1. Reduce lines and deep wrinkles on the face
2. Tighten skin on the face and neck
3. Improve skin tone around eyelids, jowls and neck
4. Rejuvenate sun-damaged skin and improve texture
5. Remove pigmented lesions
6. Improve tone and texture on the chest, arms, and hands
7. Change the appearance of scars.
Specification:
Wavelength:
|
10600nm
|
Laser apparatus:
|
Sealed off laser device simulated by direct current
|
Optical beam quality:
|
TEM00
|
Output power:
|
30w
|
Spot size:
|
0.02~0.05mm2
|
Aiming beam:
|
Red semiconductor laser (635nm, less than 5mw)
|
Beam transport device:
|
Articulated arm with 7-joint and balance weight
|
Working mode:
|
Continuous operation
|
Output Mode:
|
Continuous, single pulse, interval pulse and super pulse
|
Scan scope:
|
Max 20mmx20mm
|
Scan graphics:
|
Circle, triangle, square, rectangle,hexagon, ellipse, line
|
Scanning Mode:
|
Random , Normal and Midsplit scan
|
Scanning speed:
|
More than 10m/s
|
Energy:
|
1- 30W
|
Pulse width
|
0.1-5.0ms
|
Distance:
|
0.1-2.6mm
|
Input power:
|
450VA
|
Cooling system:
|
Water and air circulation
|
Environment temperature:
|
5°C~40°C
|
Relative humidity:
|
Less than 80%
|
Power:
|
110V / 220V
|